Skip to content

Egress Systems Chicago, IL

Chicago Illinois Egress Systems

"When you have an emergency, you don't want to waste time finding an expert in egress window repair," says Ram J. Jack, owner of Ram Jack Commercial Roofing in Lincoln, Neb. "When you have a repair on your shingles, it's important to work with a company that knows exactly how to handle problems like this." Since 2020, Ram J. has installed and repaired all kinds of roofs, including commercial ones. "We always start with the best source of information about our clients' needs," he says.

NEW Free Quote - Red


    If your commercial structures requires egress windows, the most reliable experts to call are the ones who have installed it before. "That's why we prefer to work with Ram Jack," says Bob Young, project manager for Ram Jack Commercial Roofing in Lincoln, Neb. "We do all the custom installations in-house and only hand off the job to specialists when it comes time to replace the existing ones." Whether you need to install one or multiple, can have the job done on time, on budget and without any problems thanks to the specialized knowledge and experience, the company you call should be one that knows exactly how to handle a repair like this.

    For basement egress window installation, the general contractor will likely require access to the foundation. They will want to know if there's water seepage, cracks, or other irregularities in the foundation. They'll also check for cracks in the shingles and membranes as well as any other components that may be affected by the installation process. Any cracks or other irregularities will usually need to be repaired prior to the installation of the new windows.



    As far as the installation goes, the contractor will install the egress window wells according to local codes and requirements. They'll measure and quote you accordingly. A local professional such as Chicago Foundation Repair Pros has the experience installing this type of hardware will be your best bet for getting it installed properly.

    The egress windows are designed to be installed within a structure in which water cannot easily get in. Waterproofing and insulating materials are typically used during installation, but a contracting and waterproofing company can help if you have specific needs. A good contractor will work closely with you and your structural engineer to ensure the best setup possible for your building and property. There are a few options to consider, including tilt-up and tilt-down installation options.

    Tilting down is an option that is growing in popularity because it provides greater structural integrity to a building. Tilt-down is more commonly used for commercial structures because it requires less skill when installing. Tilting up, on the other hand, requires a professional to accomplish this task using specialized equipment. Depending on the code requirements of your area, tilting down may be required in order to meet local regulations. If your living spaces are located in a part of your home that doesn't currently have this requirement, this could be a very wise investment.


    Egress Windows

    The egress window's tilt-up installation requires a different approach, as it requires higher ceilings. In most cases, a contractor would install the components and hardware for the tilting solution using special equipment. This is not necessary for residential structures, where the vertical panels are self-contained within the frame. The horizontal panels are attached to metal frames that are bolted to beams that support the entire structure. When installing an egress window that requires a tilting mechanism, the technician must also measure the height of the building codes in your area. The regulations often specify an exact height, which can be a substantial difference from the suggested heights by a contractor.

    Installing the egress windows and their tilt-up mechanism involves more than simply tilting the unit upward. Contractors must also deal with the issues of ventilation as the panels must be installed with at least one window or fan installed to draw air upward into the home. The type and size of vents will vary based on the location of the panels within your home, so a qualified professional would need to visit your home in order to determine what size vents would be best. The location of the vents also dictates whether or not the window or fan should be installed inside or outside of the home. Inside fixtures typically require vents to be placed 12 inches from the top of the frame or above the existing roof structure. Outdoor fans are commonly installed at the base of the unit, providing a continuous flow of air.